3d-printer - ksi0

ksi0

3d-printer

3D printing related posts

Fixing Ignition Missing Cover

Used Iseki TK-25 micro-tractor, that I bought, came with a broken (missing) cover for ignition. I replaced it with a 3D printed part using colorFabb's varioShore TPU. As always, it took several iterations to get the part right. 3D model: iseki-tk25-key-cover-Bodyiseki-tk25-key-cover-Body.3mf47 KBdownload-circle

Fixing Broken Rocker Switch Cover

Fixing Broken Rocker Switch Cover

Iseki TK25 has a couple of rocker switches with protective rubbers that, due to age, are partially torn. Thanks to Colorfab's varioShore TPU material it's possible to print very flexible objects. It took several iterations to get the right sizes, as the printed pars is not

Printing Rubber Replacement Parts

Printing Rubber Replacement Parts

3D printed rubber part for missing side panel dumper. Original Iseki part number: 1560-602-001-40. Price is around 10 € (2024). This is the original location of the part: 3D printed part installed: Part design and print: Files: iseki-tk25-side-panel-dumper-Bodyiseki-tk25-side-panel-dumper-Body.3mf28 KBdownload-circle

Repair of a Thermos Bottle

Repair of a Thermos Bottle

One of the parts of a Thermos bottle got lost and it started to leak. An replacement was printed using TPU material suited for 3D printing. Since the TPU material is more rigid it had to have slightly different size. Several iterations were necessary.

3D Printed RaspberryPi 4 Case

3D Printed RaspberryPi 4 Case

Here's a nice 3D printed RaspberryPi 4 case:

3D Printed Pump

3D Printed Pump

Here's a 3D printed centrifugal pump:

Fixing a Sewing Machine Broken Pedal

Fixing a Sewing Machine Broken Pedal

3D printer replacement case for sewing machine speed pedal.

Making of T-800 Arm

Making of T-800 Arm

Here's a description of making a 3D printed model of Terminator T-800 arm. Source: https://www.thingiverse.com/thing:2886923. I don't remember exactly the printing time but it was moderately long - I'm guessing around 20 to 30 hours. Beside few bigger parts

3D Printed Box in One Part

3D Printed Box in One Part

Parametric 3D printed box with lid printed as one part. Source: https://www.thingiverse.com/thing:384919.

Fan Adapter for PC

Fan Adapter for PC

What do you do if you have a noisy fan, but the substitute is smaller? Design an adapter. Quick design and print... Now, the design was too fast, as the outer (big fan) holes do not match. Quick hole location correction and removed excessive material. Bonus: inside of the PC

3D Printed Moon Lamp

3D Printed Moon Lamp

3D printed Moon lamp: Source: https://www.thingiverse.com/thing:4176380. Total print time was about 65 hours, printed on PRUSA MK2S printer with marble (gray) PLA plastic. As a lamp stand generic IKEA lamp + cold LED bulb was used.